
Add to Cart
Prevent Soil Erosion, Ground Subsidence And Water Pollution Plastic Geogrid Mesh
Plastic Geogrid Mesh Introduction
Biaxial geogrid is made of Polypropylene resin as its raw material, ,it is produced through the process of extruding, punching, heating, longitudinal stretching and transverse stretching.
Main type: 15-15KN, 20-20KN, 25-25KN, 30-30KN, 35-35KN, 40-40KN, 45-45KN, 50-50KN
Plastic Geogrid Mesh Features
1.Reduce sub-excavation
2.Decrease aggregate fill thicknesses
3.Simplify construction, fast deployment
4.Suitable for any weather conditions
5.Land optimization and land utilization properly
6.high durability, long service life
Biaxial Plastic Geogrid Specification
project | TGSG15-15 | TGSG20-20 | TGSG25-25 | TGSG30-30 | TGSG40-40 | TGSG45-45 | TGSG50-50 |
Longitudinal tensile yield force KN/m | 15 | 20 | 25 | 30 | 40 | 45 | 50 |
Transverse tensile yield force KN/m | 15 | 20 | 25 | 30 | 40 | 45 | 50 |
Tensile Strength @2% Strain KN/m | 5 | 7 | 9 | 10.5 | 14 | 16 | 17.5 |
Tensile Strength @5% Strain KN/m | 7 | 14 | 17 | 21 | 28 | 32 | 35 |
Roll width | 3.95 or 5.95 meters | ||||||
Roll Length | 50 meters | ||||||
Colour | black, gray, green |
Plastic Biaxial Geogrid Applications
1. Slope protections and culvert reinforcement of railway and highway.
2. Secondary reinforcement of soil slope after unidirectional tension geotechnical grid reinforcement and further reinforcement of soil slope sp as to avoid soil erosion.
3. Reinforcement of mile and gallery.